Irvine Shade And Door, Inc. Custom Slow-Rise Day And Nite Roller Shades

Irvine Shade & Door’s innovative and smooth-operating Slow-RiseTM Roller Shade has taken the industry by storm. These shades have revolutionized the industry and are available in a variety of beautiful colors and configurations. Though there are imitators out there, authentic Slow-RiseTM Roller Shades are only manufactured by Irvine Shade & Door.

Slow-RiseTM Day/Nite Roller Shades offer state-of-the-industry performance, featuring hydraulic speed reduction for smooth operation and automatic stopping points. 5% Day Solar Screen allows you to see out, but others can’t see in. Accessible color-coded knobs allow adjustment of speed and upper-limit stopping points.

Slow-RiseTM Nite Roller Shades are an economical high-end window treatment, featuring 4-ply blackout linen embossed vinyl and the same revolutionary quality and operation of our Slow-Rise Day/Nite Roller Shades.

HOW TO FILL OUT THE ORDER FORM:

*If you are ordering more than ONE roller shade, you will need to input the information for each one in separately and add the correct quantity to your shopping cart. Then change the information for the next shade and again add the correct quantity to your shopping cart.*

Step 1) Select the type of roller shade configuration you would like. The “Y-Bracket” configuration is most commonly used in the front of RV’s over the driver’s and passenger’s side windows. The “Back-Roll” configuration is the most commonly used configuration for all other windows.

Step 2) Select the color screen you would like for the DAY shade.

Step 3) Select the color you would like for the NITE shade. *NOTE: The color Oyster and Champagne are very similar. The only differences are that Oyster is more of an eggshell color and Champagne is more of an almond color. The color Linen Suede can sometimes have a pinkish tint to it depending on the color scheme of your RV.*

Step 4) Measure carfeully! Measure the width of the window from side to side starting from the inside of the valence on the left side to the inside of the valence on the right side. SUBTRACT ONE INCH from that total measurement. This is important because it will then allow a 1/2 inch on each side of the roller shade to pull down and retract without any interference from the valence.

Step 5) Measure the height from the top of the inside of the valence to the bottom of the window frame.

Step 6) Select the type of mounting bracket you need.

Step 7) Verify the Quantity you are ordering is correct for the information you just entered and then click “Add to Cart.” It will then take you to your Shopping Cart and show you your total based on the measurements and type of shade(s) you selected.

*IMPORTANT MEASUREMENT: There will need to be a 2-1/2″ clearance between the window frame and the valence/arms from top of the window to the bottom. If you are NOT confident about the clearance between your window frame and valence please contact us directly via email on our Contact Us page on the website, by emailing [email protected], or by calling us directly at 866-713-3429.*

**These are CUSTOM to your measurements and therefore are NON-REFUNDABLE and NON-RETURNABLE**